Pleated Dust collection Filter Bags

Nomex Filter Fabric made aramid filter bags Features 1.Good temperature resistance. It can regularly work in the continuous 204℃, and can bear the instant temperature of 240℃. 2.Good stability. Under the 240 ℃, its heat shrinkage ratio is less than 1%. Nomex filter media has an excellent high temperature stability. 3. Excellent chemical resistance. It can work normally in the low concentration of acid , alkali and hydrocarbons even if in the small amount of the fluoride environment. 4.Good fire resistance. Nomex(aramid) filter media only start to carbonize from 400℃, which is neither easy to autoignition and combustion-supporting. With these good performances, Nomex(aramid) filter media is widely used in steel industry, carbon black industry, construction industry and power industry. And become the best selling high temperature resistance filter media

Selective catalytic reduction (SCR) catalyst called SCR flue gas denitrationcatalyst, SCR technology is denitration catalyst in the appropriate temperature, using ammonia (NH3) as the reducing agent, take the advantage of the reducing agent selective, preferentially reaction with industrial flue gas of nitrogen oxide (NOx), NOx is converted into no pollution of nitrogen and water, and NOx reduction efficiency is as high as above 90%.

Breathable, Anti-Static,Aperture density uniform,Low resistance,large flow rate.

Polyimide Fiber (P84)-the Dust Removal Material with The Highest Temperature Resistance Class Introduction: Polyimide Fiber, Also Known As Aramid Fiber, Is A High-performance Fiber Prepared By Polymerization Of Pyromellitic Dianhydride And Aromatic Diamine To Obtain Polyamic Acid Prepolymer, And Then Through Solution Spinning. Polyimide Fiber. It Is Mostly Used In Dust Collection Bags And Is Known As The Title Of "golden Silk".

The PTFE filter bag is a unique material made of filter bag. It can withstand the acid-base erosion in the whole pH range under the temperature from 240 °C to 260 °C. The PTFE  filter bag is excellent in self-lubrication, does not absorb moisture, and can withstand ultraviolet radiation. However, the PTFE fiber filter material has a general wear resistance, so there is a strict requirement (cleanness) for the filter bag frame. PTFE fiber filter bags are suitable for use in harsh conditions where corrosion resistance is required and where filter media life requirements are high.

Filter Bag are composed by non woven filter material bag body, snap ring, clamp, chain hoist, etc. The rest of the filter bag dust collector and its accessories are the venturi tube, frame, mouth of elastic ring, etc.

Pleated Dust Collection Bag is the latest and most innovative industrial dust collection technology on the market today. Large number of factories, industrial units are switching to the Dust Collection Filter technology from traditional bags and cage technology because of various advantages like higher filtration area, Lower Pressure Drop, Reduction in size of dust collection system.YUANCHEN filter is a leading Pleated Dust Collection Bag Manufacturer, our pleated filter bags are designed to have many different folds of fabric in a smaller area than a traditional bag. These bags are made up of 100 % spun bonded polyester media with different coatings on it. These coatings are variable and put as per the need and requirements of a particular industry or the applications. This spun bonded polyester media can accommodate desired filtration area as it has different pleated depths & heights.

High temperature resistant Silicone coated fiberglass fabric is a glass fiber fabric, coated with silicone rubber.Points from the coating surface, silica cloth, there are two: one-sided silicone cloth, double-sided silicone cloth, single-sided and double-sided silicone Burkina present similar application properties.